How to install windows 7/8 directly from Pen drive

 This guide works 100% for Windows seven and Windows 8 in contrast to most of the guides out there. I actually have conjointly seen some guides that don’t’ use correct commands during this guide. 

After spending several hours I actually have come back up with this 100% operating guide to put in Windows seven and Windows eight from USB flash drive.

I simply did this methodology on one in every of my friends machine and put in Windows seven and Windows eight . The main advantage is that by USB drive you may be able to install Windows seven or Windows eight in precisely fifteen minutes. you'll conjointly use this bootable USB drive on friend’s pc who doesn’t have a optical disc optical drive.

The method is extremely straightforward and you'll use while not any hassles. unneeded to mention that your motherboard should support USB Boot feature to form use of the
bootable USB drive.

Requirements::-
*USB Flash Drive (Minimum 4GB)
*Windows seven or Windows eight installation files.

•Follow the below steps to form bootable Windows 7/Windows eight USB drive bootable that you'll install
Windows seven or Windows eight simply.

==>Procedure::-

1 . Plug-in your USB flash drive to USB port and move all the contents from USB drive to a secure location on your system.

2. Open command prompt with admin rights. Use any of the below strategies to open prompt with admin rights.

*Type cmd in begin menu search box and hit Ctrl+ Shift + Enter.

Or

*Go to start out menu &goto>All programs>Accessories,
right click on command prompt and choose Run as administrator.

3. you wish to understand concerning the USB drive to a small degree bit.
Type within the following commands within the command prompt:

*First type DISKPART and hit enter to visualize the below message.

*Next give LIST DISK command and write the Disk range (ex: Disk 1) of your USB flash drive.

4. Next kind all the below commands one by one.
Here I assume that your disc drive no is “Disk 1”.If you have Disk two as your USB flash drive then use Disk 2.Refer the higher than step to verify it.
So below square measure the commands you wish to kind and execute one by one:
SELECT DISK one
CLEAN
CREATE PARTITION PRIMARY
SELECT PARTITION one
ACTIVE
FORMAT FS=NTFS
(Format method could take few seconds)
ASSIGN
EXIT

**Don’t shut the prompt as we want to
execute an additional command at consecutive step. Just minimize it.

5. Next insert your Windows7/Windows eight optical disc into the optical drive and check the drive letter of the DVD drive. during this guide i will be able to assume that your DVD drive letter is “D” and USB drive letter is “H” (open my computer to understand concerning it).

6. Maximize the decreased  prompt within the 4th step.Type the subsequent command now:

D: CD BOOT and hit enter.Where “D” is your optical disc drive letter.

CD BOOT and hit enter to visualize the below message.

7. Type another command given below to update the USB drive with BOOTMGR compatible code.

BOOTSECT.EXE /NT60 H:

Where “H” is your USB drive letter. Once you enter the higher than command you may see the below message.

8. Copy your Windows seven or Windows eight optical disc contents to the USB flash drive.

9. Your USB drive is prepared in addition and install Windows seven or Windows eight. solely factor you wish to change the boot priority at the BIOS to USB from the
HDD or CD ROM drive. I won’t make a case for it as it’s simply the matter the dynamic  the boot priority or sanctioning
the USB boot choice within the BIOS.

Note: If you're unable in addition when following this guide means that you haven’t set the BIOS priority to USB.
If you bought any downside in following this guide feel free to raise queries by going away comment.

This guide works 100% for Windows eight additionally. Make sure you follow all steps properly and launch the Command Prompt with admin rights (as given within the
guide) to avoid errors. Good luck!